Facing bricksGreen - Grey

Technical data sheets

Color description
The colour is green-grey with nuances and black-grey accents.
Manufacturing dimensions (L x W x H)
ca. 188x90x45 mm (LxWxH)
Quantity / m² with a traditional joint
88 (12 mm)
Number / m² with a thin joint
102 (6 mm)

case studie Green - Grey

Care home, Huise-Zingem (Belgium) by Sergison Bates Architects

Care home, Huise-Zingem (Belgium) by Sergison Bates Architects

An English view on Flemish tradition

Sergison Bates architects have earned a reputation as one of the UK’s leading architectural practices. Recently they were responsible for the development of a care home in Huise-Zingem, Belgium. 

The old gasworks in Lier

The old gasworks in Lier

Coherent architecture with variations in shade

As the name suggests, the project is situated on the site of the old gasworks on the outskirts of Lier.  

Hand-Made miniature green grey facing brick makes the building stand out thanks to its texture and colour

Hand-Made miniature green grey facing brick makes the building stand out thanks to its texture and colour

The Joremaaie Apartment Building in Ghent, timeless and solid brick architecture

The Joremaaie project is located in Ghent city centre. It is the second project that CAAN architecten have carried out at this site for Lafaut Invest. The first project (Leiezicht Apartment Building) is located right next to this one. The third and latest project (Bord de Lys Apartment Building) is located a bit further along the street.


Search by city

Reference list Green - Grey
Postal code City Street Bond Joint Joint colour Window Roofing Remarks
1092 CS Amsterdam Derde Oosterparkstraat 12 mm
2000 Antwerpen Madrasstraat 62-64 12 mm
8792 Desselgem Grote Heerweg 240 12 mm
4267 EW Drongelen Gansoyen 1D 12 mm
3500 Hasselt Berthold Brechtstraat 22 12 mm
7740 Pecq Rue de l’escalette nr 47 a 12 mm
3998 JR Schalkwijk Jonkheer Ramweg 31 12 mm
Print all

How to Install ?

Preparation of the construction site

Quality brickwork starts with the proper storage of the materials. Provide a firm level base so that bricks are not in contact with rain and/or dirt.  
As clay is a natural material, successive production runs of the same kind of bricks may present colour variations and size tolerances.
The following precautions will help minimizing this:
  • Always order the full amount of bricks required for a specific site. In this way, the entire order can be made during one production run.
  • Try to have the full order supplied at one time. If this creates several deliveries, always mix a number of packs from the previous delivery with a number of packs from the new delivery. This procedure is especially recommended in case of re-order or for an additional order.
  • Take bricks diagonally across the pack.
  • Draw and use bricks from at least five different packs.
  • For setting out, use bricks from the delivery made to the site in question. Do not exclusively use the theoretical dimensions of the brick, or samples previously supplied, or different production run from that intended for the site.
  • As soon as the bricks arrive on site, check delivery tickets and certificates against the specification and order. Also check that there are no visible inconsistencies with the order.
  • Do not lay bricks in freezing weather or protect the ‘fresh’ masonry with insulating mats in order to avoid frost damage to the mortar.
  • In the case of prolonged dry hot weather, lightly dampen the newly laid brickwork to stop the mortar drying and curing too quickly.
  • Do not lay bricks in precipitation in order to prevent mortar from running on the wall.

Avoid Efflorescence

Brickwork is sometimes marred by white bloom. This efflorescence is usually caused because bricklaying is done under unfavourable weather conditions. The necessary protective measures are often not implemented due to a tight schedule and fast building pace. In very wet conditions, water in soluble substances can result in efflorescence on the surface. In spring as well as autumn, after a wet period (when the brickwork has dried again), soluble substances can rise to the surface as a result of moisture transport. After evaporation of the water, a white bloom is left behind. (Source: Efflorescence on brickwork – Heidelberg Cement Group)
Efflorescence on brickwork is always likely to occur. There is no brick - or combination of a certain brick with a specific mortar - that is absolutely efflorescence-free. By taking a few simple precautions, the risk of efflorescence can be reduced.
  • During and after laying, protect the newly built brickwork for a height of at least 60 cm - but ensure there is airspace between the brick face and the waterproof covering.
  • Provisionally install rainwater down pipes to avoid saturation of the newly laid brickwork
  • Never lay bricks in driving rain conditions